Instruction manual

Operation
How to use the FUNCTION field
2-26 WX Ultra Series Thermo Scientific
6 To select a desired rotor from the
“Rotor Management”:
(1') Select “Rotor Management”.
(2') Select a desired rotor using the
upward or downward cursor key
.
(When using fixed angle rotor T-8100)
(3') Select “Yes”.
To select no rotor:
Select “None”.
7 Enter values into SPEED (RCF
max
or
RCF
avg
or ω
2
T), TIME, TEMP, A
(ACCEL), and D (DECEL).
>> To enter run conditions in multiple steps in a step-mode operation, continue
the operation from the above. (See Section Step-mode operation.)
>> You cannot skip a step. (You cannot enter anything in step 2 with nothing
entered into step 1.)
• The display switches to the Rotor
Management screen and the
Rotor List is displayed.
• The rotor type you have just
entered appears in the top row in
the screen.
• The SPEED field in the SPEED
priority screen blinks.
• The SPEED field in the SPEED
priority screen blinks.
Example
(Downward cursor key)
• When you finish entering run
conditions for step 1, step 2 enters
into an input wait state.