Instruction manual

Operation

How to use the FUNCTION field

2-24 WX Ultra Series Thermo Scientific

1. Programming procedure for run conditions (creating or changing)

Shown below is the procedure for storing (creating) or changing a run condition.

Step Key operation Screen display and considerations

1 While in the Run Screen, use the cur-

sor keys to move the cursor to PROG •

RTC and press ENTER key.

Then, move the cursor to PROG and

press ENTER key.

Press the upward cursor key to

cause PROGRAM to blink, then press

ENTER key.

>> If you wish to store a new condition, enter it into an empty memory number.

3 Use numeric keys to enter a memory

number you wish to store (or change).

Example: To store a condition in mem-

ory number 3, press

4 Select “Creating or Changing.”

• The FUNCTION field

switches to the PROGRAM

field.

• The MEMORY No. setting

field blinks.

• The display switches to the

Program Map screen and the

MEMORY No. selection

field blinks.

• The memory screen you

have just specified appears.

• The message field in the bottom

row switches to what is shown in

the figure to the left.