Instruction manual

Operation
Basic operation
Thermo Scientific WX Ultra Series 2-9
Setting user ID code
The USER ID CODE is a number to identify each user and can be set in up to 4 digits.
When the user ID CODE is entered, the user record will be stored in the memory of the centrifuge and
can be printed if a printout operation is done (optional).
Entering a user ID CODE may not be always required for operation (Lockout feature optional). If the
centrifuge is not equipped with the optional lockout feature and the user does not need to be
identified, the centrifuge can be operated without an ID CODE.
• To use a name (user name) corresponding to the user ID code or ID code, it must be registered.
For the registration method, see Section User list.
Step Key operation Screen display and considerations
1 On the Run Screen, use cursor keys to
move the cursor to ID CODE and press
the ENTER key.
2 Use numeric keys to enter ID CODE
(4 digits).
(When entering 0123)
ID code
3 Press the ESC key on the keyboard to
return to the FUNCTION field.
• The display switches to the
rotor control field, which
displays the Rotor List
screen.
• The display switches back
to the Run Screen and
“T-8100-1234” is
displayed in the message
field.