Specifications

– 35 –
UBS Wiring Harness Handbook
Dolly Chassis - Main and Rear Sill Harness Options
90º Male PinStraight Male Pin
Nose BoxFemale Pin
1/4” Molded Ring
Terminal
(For Rear Sill)
(Redundant Ground)
Connection Options
(See also page 6)
NOTE: The parts highlighted in light blue are recommended by Grote.
*Recommended Part Illustrated below
*Recommended Part Illustrated below
Part # Lamp Plug “A” Curb Side Road Side ABS Drop
01-6757-94 Female Pin 52" 52" 12"
01-6758-A1* Male Pin 52" 52" 12"
2
Rear Sill Harness
Part # Length Wire Ga.
01-6670-K4* 78" 8/10/10/12 x 4
01-6670-H5 90" 8/10/10/12 x 4
1
Main Harness
Standard #10 Ring
Terminal
3
ABS Fault Lamp Harness
Part # Length Lamp Connection Power Connection
01-3600-A6 60" Marker lamp plug .180 Slim-line Male
01-6622-12 60" .180 Slim-line Female .180 Slim-line Male
4
License Lamp (optional)
Lamp Power
Part # Length Connection Connection
66910 6" Turtleback II .180 Slim-line Male
66980 6" Series 19 .180 Slim-line Male
66850 6" Marker lamp plug .180 Slim-line Male
Chassis Ground
Gauge Chart
8/10/10/12 x 4
8- White (Ground)
10- Red & Blue
All others 12 gauge