Instruction manual

MICRO 4000
®
NET Web Guide Control System
5
2. MICRO 4000 NET
Controller Board
• Single-board design
• Auto-recovery after power interruption
• Non-volatile memory for user-settable parameters and operating modes
• On-board parameter entry keypad and display
• Two edge detector inputs for centerline guiding
• Serial I/O port for remote station and digital line guide
• Analog ±10 VDC output for controlling motor drive
• Actuator end-of-travel inputs:
Potentiometer input for electronically-adjustable limits
Limit switch inputs for fixed limits
• Opto-isolated inhibit input
• Opto-isolated fault indicator output
• Auxiliary analog and digital I/O
• Input voltage: 90-132 VAC or 180-264 VAC, 50/60 Hz, single-phase
3. MICRO 4000 NET PWM Motor Drive
• Fast, accurate response to web movement
• Drives brush or brushless DC motors up to 746 watts (1.0 HP)
4. MICRO 4000 NET
Enclosure
• Low profile
• Environmentally-sealed function switches
• Cam-locked door with double-bit insert key
• External mounting feet
5. AccuWeb Linear Actuator
• Available with brush or brushless DC motors up to 746 watts (1.0 HP).
• Available with standard stroke lengths up to ± 6” [± 152mm] (other lengths available upon
request)
• Available with limit switches or potentiometer for sensing end-of-travel limits and servo-
center position