Instruction manual

PointSource™, WideArray™, and Hi-Temp Edge Detectors
57
Introduction
The MICRO 4000 NET and MICRO 1000 controllers are compatible with AccuWeb’s entire range
of PointSource and WideArray ultrasonic and infrared edge detectors, and the MICRO 4000 NET
is also compatible with the Hi-Temp ultrasonic edge detector. Refer to page 58 for a list of
standard models.
PointSource and WideArray Compensated Edge Detectors
• Ultra-compact housing
• Available with sensing areas ranging from 0.2” to 18.6” wide [5mm to 472mm]
• Available with gap widths ranging from 1.5” to 4” [38mm to 102mm]
• Fully compensated for temperature, humidity, dust, and most other process contaminants
• Immune to passline variation and web flutter
• Suitable for long cable length applications
• Intrinsically-safe models available for hazardous environments
• Ultrasonic models are ideal for transparent or opaque film, paper, and foil web materials
• Infrared (IR) models are ideal for non-wovens and other porous web materials
Hi-Temp Compensated Ultrasonic Edge Detector
• Withstands oven temperatures up to 500 deg F [260 deg C]
• Available with waveguide tube lengths up to 84” [213cm]
• Fully compensated for temperature, humidity, dust, and most other process contaminants
• Immune to passline variation and web flutter
• Suitable for long cable length applications
• Intrinsically-safe models available for hazardous environments
• Ideal for transparent or opaque film, paper, and foil web materials