Instruction manual

MICRO 4000
®
NET Controller
41
71 Integrator input offset 0-2 0
72 AUXILIARY and INHIBIT input config 0, 1 0
73 Integrator rate multiplier 0-2 0
74 Sensor A transducer orientation 0, 1 0
75 Sensor B transducer orientation 0, 1 0
76 Sensor A reduced length 2-128 2
77 Sensor B reduced length 2-128 2
78 Fieldbus swap bytes 0, 1 0
1
These parameters are used for monitoring system functions and cannot be changed through the
programming keypad.
2
These parameters are used for calibrating the edge detectors.
3
These parameters are primarily used for monitoring system functions, but can be changed
through the programming keypad.
4
These parameters are used for installing optional features such as oscillation, web width
monitoring and integration. Contact AccuWeb for availability.
5
These parameters function only if the oscillation option is installed. Contact AccuWeb for
availability.
6
Option 2 is available only if the integrator option is installed. Contact AccuWeb for availability.