Instruction manual

Fieldbus Interface
130
Modbus Plus Addressing:
When setting up the MSTR function, the read command (MICRO 4000 NET to Fieldbus Master
(host)) must use register 40001 and the write command (Fieldbus Master (host) to MICRO 4000
NET) must use register 41025.
If the MICRO 4000 NET is located on a Modbus Plus network using a NOM module, do not forget
to include the slot number on the NOM module along with the node address of the MICRO 4000
NET unit, in hex format, in the first routing path address.