Instruction manual

Remote Station – Auxiliary
101
Keypad Lock
The Remote Station’s keypad can be Locked or Unlocked to control access to the parameters.
This feature is typically used to prevent accidental or unauthorized changes to stored values and
to simplify the menu by hiding unused parameters.
When the keypad is Locked, the Hidden and Read-Only parameters are activated. The Hidden
parameter hides unused parameters (if a parameter is Hidden it cannot be selected or displayed),
and the Read-Only parameter prevents changes to parameters (if a parameter is Read-Only it
can be displayed but not changed).
When the keypad is Unlocked all parameters are visible and all parameter values can be
changed.
• To Lock the keypad, press and hold the DOWN key while cycling AC power to the attached
controller.
• To Unlock the keypad, press and hold the UP key while cycling AC power to the attached
controller.