User`s guide

Figure 77: 6x10 Multi-Rack Pusher Block Assembly.

1. Remove Dual Syringe Anti-Syphon Bracket by unscrewing the Bracket Clamping Knob completely and

removing the Bracket Clamping Shaft.

2. Attach the Pusher Bar to the Pusher Block using flat head screws (2).

3. Assemble the Hold-Down Bracket to the 6x10 Anti-Syphon Bracket using Thumbscrews (2).

4. Attach the Anti-Syphon Bracket Assembly to the pusher bar using the Thumbscrews (3), Washers (3),

and Springs (3). Slide Thumbscrews through the Pusher Bar holes, slide Washer then Spring over

Thumbscrews and tighten to the Pusher Bar.

Harvard Apparatus PHD ULTRA

™

Syringe Pump Series User's Manual

Publication 5419-002-Rev-A

ppendices