User`s guide

APPENDIX D: SYRINGE HOLDER OPTIONS

Mounting a 4x140 Multi-Rack

Figure 74: 4x140 Multi-Rack Syringe Holder Assembly.

1. Remove Syringe Clamp bracket from the Syringe Holder by unscrewing knob.

2. Attach the Multi-Retainer to the Multi-Holder using T-Knobs (2) with Spring Washers (2).

3. Place the Multi-Holder on the Dual Syringe Holder and attach using #10-32 x ½” Screws (4).

4. Attach Clamp Bar by screwing the Multi-Syringe Clamp Knob into the threaded bar attached to the

Multi-Holder.

Harvard Apparatus PHD ULTRA

™

Syringe Pump Series User's Manual

Publication 5419-002-Rev-A

ppendices