User`s guide

MANAGING EZ PRO METHODS

All Preloaded and User-Defined Methods are stored in the Method List for ongoing use. Over time, you may

want to manage previously created Methods to keep your Method List easy to navigate. In addition, the

PHD ULTRA

™

allows you to export Method information to an externally connected pump or to a computer

that will be used to control operation. This section of the Guide describes the file management facilities

available on the PHD ULTRA

™

Saving A Copy Of A Method

Follow these instructions to save a copy of a Method under a new name:

1. From the Quick Start or Method Main screen, choose the Method Select button to enter the Method

Selection screen.

2. From the list of available Methods, select (press once) the Method you want to save a copy of, then

choose the File Options button to enter the File Options screen.

3. Choose Save As/Copy to access the Method Name Entry screen. The current Method Name will be

displayed in the text entry box.

4. On the Method Name screen, type the new name for your Method using the onscreen keyboard.

Choose the Symbols/Numbers button (.?123) to display the list of available numbers and symbols that

can be included in the Method Name. To switch the keyboard back to letters mode, choose the Letters

button (ABC).

5. When finished entering the new Method Name, choose Accept to save your changes and return to the

File Options screen.

6. Choose the Accept or Cancel buttons to return to the Quick Start or Method Main screen.

Renaming A Method

Follow these instructions to rename a previously saved Method:

1. From the Quick Start or Method Main screen, choose the Method Select button to enter the Method

Selection screen.

2. From the list of available Methods, select (press once) the Method you want to rename, then choose

the File Options button to enter the File Options screen.

3. Choose Rename Method to access the Method Name Entry screen. The current Method Name will be

displayed in the text entry box.

4. On the Method Name screen, type the new name for your Method using the onscreen keyboard.

Choose the Symbols/Numbers button (.?123) to display the list of available numbers and symbols that

can be included in the Method Name. To switch the keyboard back to letters mode, choose the Letters

button (ABC).

5. When finished entering the new Method Name, choose Accept to save your changes and return to the

File Options screen.

6. Choose the Accept or Cancel buttons to return to the Quick Start or Method Main screen.

✐

NOTE: The method management procedures outlined in this section are not available

for Quick Start Methods.

Harvard Apparatus PHD ULTRA

™

Syringe Pump Series User's Manual

Publication 5419-002-Rev-A

sing The PHD ULTRA™