User`s guide

GO TO STE P

The Go To Command is used to instruct the PHD ULTRA

™

to jump to a particular Step in a Method. This

can be used to help you loop back or jump forward in a Method protocol and can be used in conjunction

with I/O Events to make the pump respond to a trigger from an external device.

When defining a Go To jump in a Method, the Command targets the Step sequence position and not the

function that currently occupies that position. For example, if you create a Go To jump to Step 4 in a

ethod (currently a Bolus Pump Operation Profile) and subsequently move a Constant Rate profile into the

Step 4 position, the Go To jump will then connect to the Constant Rate operation and not to the Bolus

operation.

TO INSERT A GO TO JUMP:

1. From the Method Main screen, choose Step Definition to enter the Method Steps Summary screen.

2. Highlight (select once) the Method Step that you want the Go To jump to follow.

3. Choose the Add Step button to access the Method Steps Menu screen.

4. Choose Advanced Options to enter the Set Advanced Options screen.

5. Choose Go To to insert the Go To Step and view an updated list of all current Steps in the Method.

Figure 66: Advanced Options Go To Step screen. Choosing the Go To Command brings you to a listing of the

available steps in the Method.

6. Double tap the Step that you want to jump to with the Go To Command. The system automatically

returns to the Method Steps Summary screen which now shows the Go To Step inserted in the

Method.

Harvard Apparatus PHD ULTRA

™

Syringe Pump Series User's Manual

Publication 5419-002-Rev-A

sing The PHD ULTRA™