User`s guide

6. When all parameters are correctly set on the Set Rate screen, choose Accept to confirm your settings

and return to Step Definition screen.

7. Choose the Set Target Volume or Time button to enter the Set Volume or Time screen.

8. On the Set Volume or Time screen, select the Volume or Time button, as desired.

. Enter the desired value using the keypad, or select the Maximum Volume button.

10. If the Units of Volume/Time are not correct for your application, choose the Units button to the right

of the parameter entry box. For the Units of Volume, this choice takes you to the Units Selection

screen. For the Units of Time option, this choice will toggle the button between sec (seconds) and

h:m:s (hours:minutes:seconds). To use the h:m:s option, enter your time value in hours, minutes and

seconds, separating each value with a colon.

11. If you are changing the Units of Volume, on the Units Selection screen, select the unit of measure (ml,

µl, nl or pl) as appropriate, then choose Accept to confirm your selection.

12. When all parameters are correctly set on the Set Target Volume or Time screen, choose Accept to

confirm your settings and return to the Step Definition screen.

Harvard Apparatus PHD ULTRA

™

Syringe Pump Series User's Manual

Publication 5419-002-Rev-A

sing The PHD ULTRA™