User`s guide

USING AN EZ PRO QUICK START METHOD

Quick Start Methods are designed to help you quickly and conveniently use the PHD ULTRA

™

for simple

infusion or withdrawal applications. Each Quick Start Method requires a minimal number of user entries to

operate.

Basic Operation

The following flow diagram describes the use of a Quick Start Method:

Figure 33: Quick Start Method operation flow diagram.

All the required parameter options are accessed from the Quick Start screen. The following sections

provide a detailed overview of operation for a Quick Start Method.

STEP-BY-STEP OPERATION EXAMPLE: QUICK START INFUSE/WITHDRAW METHOD

The following procedure describes operation using the Quick Start Infuse/Withdraw Method.

Figure 34: Infuse/Withdraw Quick Start Method screen.

1. From the Quick Start screen, the Infuse/Withdraw Quick Start Method should be displayed in the

Method Select button. If that Method is not displayed, select the correct Method using the procedure

outlined in Running The Pump.

Select Method Type

Enter Flow Rate Parameters

(Infuse Only, Withdraw Only, or

Infuse and Withdraw)

Select Syringe Model

Create New Syringe Type

Enter Target Volume or Time

Harvard Apparatus PHD ULTRA

™

Syringe Pump Series User's Manual

Publication 5419-002-Rev-A

sing The PHD ULTRA™