User`s guide

RUN THE METHOD
9. To start a pump Method, choose the Method Run button. While a Method is running, the Pump Run
LED will be lit.
The Run/Method Run screen will provide real-time feedback on the progress of the Method operation
as shown below:
Figure 30: Quick Start Method Run screen after a Method has been started.
Figure 31: User-Defined Method Run screen after a Method has been started.
10. To Pause a Method during operation, choose the Method Stop button.
Qui c k Start Meth o d
• Current flow direction
(infuse/withdraw)
• Volume withdrawn/infused and
volume remaining
• Time elapsed
• Time remaining
Pre l oaded/User-D e fined Metho d s
• Current step being executed
• Total time elapsed for Method
• Total Volume Dispensed across all Method
steps
Harvard Apparatus PHD ULTRA
™
Syringe Pump Series User's Manual
Publication 5419-002-Rev-A
39
U
sing The PHD ULTRA™