User`s guide

2. From the Syringe Selection menu, double tap the Manufacturer/Model button for the desired syringe

to enter the Syringe Size Selection screen.

Figure 25: Syringe Size Selection screen showing barrel dimensions and syringe capacity.

3. Double tap the dimensions/capacity button for the syringe you will be using.

TO CREATE A CUSTOM SYRINGE OPTION:

1. From the Quick Start or Method Main screen, choose the Syringe Select button.

2. From the Syringe Selection menu, double tap the Custom Syringe option at the top of the syringe

selection menu.

3. On the Syringe Dimension Entry screen, the Diameter (mm) entry box should be highlighted by

default. If it is not, choose the Diameter (mm) button.

Figure 26: Syringe Dimension Entry screen.

4. Enter the diameter of your syringe using the keypad.

5. Choose the Volume button and enter the total volume of your syringe.

6. If the Volume unit of measure is not correct, choose the Unit of Measure button.

7. On the Units Selections screen, select the Units button appropriate to your syringe, then choose

Accept. You are automatically returned to the Syringe Dimension Entry screen.

8. When all parameter entries are correct, choose the Accept button to return to the Quick Start or

Method Main screen.

✐

NOTE: Each custom method is capable of using and storing a different custom syringe,

but these custom syringe selections are not saved anywhere that can be recalled.

Harvard Apparatus PHD ULTRA

™

Syringe Pump Series User's Manual

Publication 5419-002-Rev-A

sing The PHD ULTRA™