User`s guide

Power Up Running
The Power Up Running Setting is designed to allow the pump to restart pump operation automatically
after a power outage when operating in a “continuous” mode. The Power Up Running selection is only
v
alid under the following conditions:
• When operating in a Quick Start Infuse Only or Withdraw Only method.
• When the pump is running at the time of a power loss.
TO SET POWER UP RUNNING:
1. From the Quick Start or Method Main screen, choose the Settings button.
2. From the Settings menu, select the Power Up Running button. The checkbox on the Power Up
Running button will be checked to indicate that the function is on. To toggle the function off, select
the button again.
3. When the Power Up Running button is set as desired, choose Accept to save your changes and return
to the Quick Start or Method Main screen.
NOTE: Counter | Timer information is reset when power resumes. Counter | Timer
information prior to power loss is lost.
✐
Harvard Apparatus PHD ULTRA
™
Syringe Pump Series User's Manual
Publication 5419-002-Rev-A
29
S
etting Up The PHD ULTRA™