User`s guide

Setting the Time and Date

The PHD ULTRA

™

displays the date and time on each screen in the user interface. Built-in battery backups

maintain the date and time even if the pump loses power or is unplugged for a period of time.

f it is necessary to set the date and time values, follow the instructions below.

TO SET THE DATE AND TIME DISPLAY:

1. From the Quick Start or Method Main screen, choose the Settings button.

2. On the Settings screen, choose the Date/Time Display box to enter the Set Date and Time screen.

. To change the Date, select the Date button and enter the Date values using the keypad in the format

defined by the date Format button to the right of the Date entry box. You can toggle between m/d/y

(Month/Day/Year), d/m/y (Day/Month/Year) and y/m/d (Year/Month/day) display by successive

selection of the Date Units button.

4. To change the Time, select the Time button and enter the current time in hh:mm:ss

(hours:minutes:seconds) format. Select the Time Format button to toggle between AM, 24 Hour and

PM values for the Time.

5. When the Date and Time values are correct, choose the Accept button to save your changes and return

to the Settings screen.

Change Logo

The PHD ULTRA

™

displays a descriptive name (termed logo in the application) on the screen. The default

value for the logo is “Harvard Apparatus.” This name is editable by the user to allow you to customize the

pump for your department/organization.

TO MODIFY THE PUMP LOGO:

1. From the Quick Start or Method Main screen, choose the Settings button.

2. On the Settings screen, choose the Change Logo box to enter the Change Logo screen.

3. Using the onscreen keyboard, type the name that you want to have displayed. The display is limited to

15 characters.

Figure 14: The Change Logo screen.

4. To type numbers or symbols, select the “.?123” button to toggle the keyboard to numbers/symbols

mode. To return to letters mode, press the “ABC” button.

5. When finished entering the new name, choose the Accept button to save your changes and return to

the Settings screen.

✐

NOTE: To reset the Logo value back to Harvard Apparatus, backspace in the Change

Logo text entry box until the field is blank, then choose Accept.

Harvard Apparatus PHD ULTRA

™

Syringe Pump Series User's Manual

Publication 5419-002-Rev-A

etting Up The PHD ULTRA™