User`s guide

NAVIGATING THE PHD ULTRA
™
EZ PRO
™
SOFTWARE
The PHD ULTRA
™
uses a high resolution touchscreen with an icon-enabled graphical user interface and an
advanced methods architecture to streamline simple to complex tasks.
The PHD Ultra Workspace
The PHD ULTRA™ touchscreen interface is divided into three basic areas:
Figure 4: The PHD ULTRA
™
Touchscreen Display. The screen shown is the Quick Start display.
The PHD Ultra touchscreen with EZ PRO Software allows you to navigate through all menu selections and
data entry by gently touching the onscreen buttons with a finger or the tip of a soft, non-sharp object such
as a pencil eraser.
The software is organized into three main navigational branches:
• Quick Start Operations
• Preloaded/User-Defined Methods
• Systems Settings
The Methods Main or Quick Start screens are the primary “home” for the applications. From those screens,
you can access all the commands needed to operate the PHD ULTRA
™
, as well as the main system settings.
From anywhere in the applications, you can return to the Quick Start or Method Main screens by:
• Choosing the Cancel or Home/Back buttons one or more times until you reach the Method Main or
Quick Start screens.
• Choosing Method Select and making a selection from the Method options available.
N
avigation Buttons: this area of the
t
ouchscreen contains the buttons used to
n
avigate through the software menus and
to start/stop pump operations.
M
essage Area: this section is used to
display the pump name, the time/date
display and the message box which
c
ontains operational messages while the
p
ump is running.
Operations Display: this section of the screen is used to display
pump operations, method information, general parameter settings
a
nd the real-time display of data while the pump is running.
Harvard Apparatus PHD ULTRA
™
Syringe Pump Series User's Manual
Publication 5419-002-Rev-A
17
S
etting Up The PHD ULTRA™