User`s guide

SAFETY INFORMATION
Please read the following safety precautions to ensure proper use of your syringe pump. If the equipment
is used in a manner not specified, the protection provided by the equipment may be impaired.
To Prevent Hazard or Injury:
Use Proper Line Cord
Use only the specified line cord for this product and make sure line cord is certified for country of use.The
operating voltage range for the PHD ULTRA
™
is 100-240 vac, 50/60 Hz.
Ground the Product
This product is grounded through the grounding conductor of the power cord. To avoid electric shock, the
grounding conductor must be connected to earth ground. Before making any connections to the input or
output terminals of the product, ensure that the product is properly grounded.
Make Proper Connections
Make sure all connections are made properly and securely. Any signal wire connections to the unit must be
no longer than 3 meters.
Observe All Terminal Ratings
Review the operating manual to learn the ratings on all connections.
Use Proper Fuse
Use only specified fuses with product.
Avoid Exposed Circuitry
Do not touch any electronic circuitry inside of the product.
Avoid Pinch Hazard
A pinch hazard may exist between the pusher block and end blocks. Avoid placing fingers between these
points while the pump is running.
Do Not Operate with Suspected Failures
If damage is suspected on or to the product do not operate the product. Contact qualified service
personnel to perform inspection.
Orient the Equipment Properly
Do not orient the equipment so that it is difficult to manage the connection and disconnection of devices.
Place Product in Proper Environment
Review the operating manual for guidelines for proper operating environments.
Observe all Warning Labels on Product
Read all labels on product to ensure proper usage.
Protective Ground
Terminal
CAUTION
Refer to Manual
!
Harvard Apparatus PHD ULTRA
™
Syringe Pump Series User's Manual
Publication 5419-002-Rev-A
13
G
eneral Information