Specifications

8.7.10 Log Sense Page 10
This page contains Self-test results.
Last self-test results log parameter-403h
First self-test results log parameter4-
Self-test results log parameters
PageLength = 190h2-3
Reserved1
Page code = 10hReserved0
01234567
Bit
Byte
The results of the twenty most recent self-tests are stored in this Log page. The following table describes
the self-test results log parameter structure.
Vendor specific19
Additional Sense Code Qualifier18
Additional Sense Code17
Sense KeyReserved16
LBA of First Failure8-15
Timestamp6-7
Extended Segment Number5
Self-Test Results
Value
RSVDFunction Code4
Parameter Length = 10h3
LP
=1
LBIN
=1
TMC=0
ETC =
0
TSD
=0
DS
=0
DU
=0
2
Parameter code0-1
01234567
Bit
Byte
Figure 76. Log Sense Page 10, Self-Test Results
! Parameter Code identifies the log parameter for the log page. The parameter Code field for the
results of the most recent test will be 0001h. The parameter for the next most recent will be 0002h.
! Function Code contains the content of the Function Code field in the SEND DIAGNOSTIC command
that initiated this self-test.
! Self-Test Results Value is described in the table below.
Ultrastar 146Z10 hard disk drive specifications
77