Specifications

8.0 SCSI Command Set
Summaries of the SCSI commands supported by the drive are listed below.
O = optional, M = mandatory.
WRITE SAME41hO
WRITE LONG3FhO
WRITE BUFFER3BhO
WRITE AND VERIFY2EhO
WRITE (10)2AhM
WRITE (6)0AhM
VERIFY2FhO
TEST UNIT READY00hM
SYNCHRONIZE CACHE35hO
START/STOP UNIT1BhO
SEND DIAGNOSTIC1DhM
SEEK (10)2BhO
SEEK (6)0BhO
REZERO UNIT01hO
RESERVE (10)56hO
RESERVE (6)16hM
REQUEST SENSE03hM
REPORT LUNA0hO
REPORT DEVICE IDENTIFIERA3hO
RELEASE (10)57hO
RELEASE (6)17hM
RECEIVE DIAGNOSTICS RESULTS1ChO
REASSIGN BLOCKS07hO
READ LONG3EhO
READ DEFECT DATA (12)B7hO
READ DEFECT DATA (10)37hO
READ CAPACITY25hM
READ BUFFER3ChO
READ (10)28hM
READ (6)08hM
PRE-FETCH34hO
PERSISTENT RESERVE OUT5FhO
PERSISTENT RESERVE IN5EhO
MODE SENSE (10)5AhO
MODE SENSE (6)1AhO
MODE SELECT (10)55hO
MODE SELECT (6)15hO
LOG SENSE4DhO
LOG SELECT4ChO
INQUIRY12hM
FORMAT UNIT04hM
DescriptionCodeType
Figure 48. Supported SCSI commands
Note: When it is not necessary to differentiate commands with different length such as READ (6) and
READ (10), a simpler form of READ will be used for both commands.
Ultrastar 146Z10 hard disk drive specifications
49