Specifications

Aborted command. Echo buffer overwritten00h3FhBh
Aborted command. Unsupported LUN. The drive supports LUN 0 only00h25hBh
Aborted command. Synchronous data transfer error. (Extra ACK detected)00h1BhBh
Predictive Failure Analysis Test WarningFFh5Dh6h
Predictive Failure Analysis threshold reached 00h5Dh6h
Unit attention. Device Identifier changed.05h3Fh6h
Unit attention. Microcode has been changed01h3Fh6h
Unit attention. Command cleared by another initiator00h2Fh6h
Registrations Preempted05h2Ah6h
Reservations Released04h2Ah6h
Reservations Preempted03h2Ah6h
Unit attention. Log select parameters changed02h2Ah6h
Unit attention. Mode Parameters changed01h2Ah6h
Unit attention. Transceiver mode change to LVD06h29h6h
Unit attention. Transceiver mode change to SE05h29h6h
Unit attention. Self Initiated Reset occurred04h29h6h
Unit attention. TARGET RESET occurred03h29h6h
Unit attention. SCSI Bus Reset occurred02h29h6h
Unit attention. Power On Reset occurred01h29h6h
Unit attention. Not ready to ready transition. (Format completed)00h28h6h
Insufficient registration resources.04h55h5h
Illegal request. Invalid message error.00h49h5h
Illegal request. Echo buffer being read before being written00h2Ch5h
Invalid release of persistent reservation.04h26h5h
Parameter value invalid02h26h5h
Illegal request. Invalid fields in the parameter list00h26h5h
Illegal request. Invalid LUN00h25h5h
Illegal request. Invalid field in CDB00h24h5h
Illegal request. Logical block address out of range. 00h21h5h
Illegal request. Illegal command operation code. This command is also
returned when an unsupported command code is received.
00h20h5h
Illegal request. Parameter list length error. The number of parameters supplied
is not equal to the value expected.
00h1Ah 5h
DescriptionQualCodeKey
Figure 202. Sense Key / Sense Code / Qualifier combinations (3 of 4)
Ultrastar 146Z10 hard disk drive specifications
220