User`s manual

TDC Ultra User’s Manual
A-2
Installing USB Drivers
The first time you are downloading the TDC Ultra to a computer using the
USB port, you will need to install the drivers for it. There are two drivers
that will be installed, one right after the other. These drivers are available on
the Downloads section of the JAMAR web site (www.jamartech.com), on
the installation CD for the PETRAPro software, and as part of the Windows
Update feature available from Microsoft using an Internet connection.
To install the drivers, first turn
the Ultra on, then connect a
USB cable to your computer
and then to the USB port of
the Ultra.
The Windows 'Found New Hardware' message will pop up, referencing USB
Serial Converter, then the Found New Hardware Wizard will appear.
One of the features of Windows XP and Vista is to use your Internet con-
nection to search the Windows Update web site for any available drivers
for USB devices you connect to your computer, like the TDC Ultra. If you
have not used this feature
before, you'll first see a
screen like the one shown
to the right when you first
connect the Ultra.
The drivers for the Ultra
are available through this
feature, so if you'd like to
allow the wizard to connect
to the Internet, select one
for the first two options and
click Next.