User`s manual

15-3
A Real-Time Clock error appears when I turn the TDC Ultra on.
There are several possible causes for this. The unit may have been affected
by static electric discharge, the internal lithium battery my be failing, or
some other internal component may have been damaged. If you encounter
this error, perform the following:
1. Clear the memory
2. Reset the Date and Time
3. Perform a short test count by programming the unit to start counting and
letting it sit for 1 hour.
4. Turn the unit off, then back on to see if the error occurs again.
If the error occurs again, contact us using the information in the front of
this manual.
Additional troubleshooting information can be found on our web site
at www.jamartech.com.
If you are unable to find a solution to your problem or question, con-
tact us using the information located on the first page of this manual.
Chapter 15— Troubleshooting