Product data

Publication 1398-2.0 - August 1999
ULTRA Series 43
Breakout Board (J2) for ULTRA 100/200 Drives (9101-1392)
TouchPad
The TouchPad (part number 1398-HMI-001) is a convenient alternative to
using Ultra Master for drive setup and monitoring. The small TouchPad
module plugs directly into the front of the drive, and its eight-character dot
matrix display and five keys provide access to many of the same functions
available in Ultra Master software.
The TouchPad is a convenient diagnostic and monitoring tool for use on the
factory floor. One TouchPad can support several drives because it is
independent of the drive and can be quickly attached and removed once
power is removed.
You can enter commands by pressing a single key or combinations of keys.
Two modes of operation are available:
• Display mode, which allows you to move through the TouchPad
command tree to each parameter.
• Modify mode, which allows you to monitor and change each parameter.
You can modify or view most parameters while the drive is either running or
disabled. Refer to the TouchPad Card (publication 1398-5.5) for more
information.
81.03
(3.190)
96.98
(1.954)
87.12
(3.430)
69.85
(2.750)
Dimensions
mm (in.)