Product data

Publication 1398-2.0 - August 1999
ULTRA Series 31
ULTRA 100/200 Drives
Options and Accessories
Ultra Master
Ultra Master is a point-and-click interface for customizing the ULTRA
100/200 drives to meet the requirements of your application. Suitable for any
PC with Windows, Ultra Master allows you to configure, monitor, and
troubleshoot a servo system. The online help and quick start-up windows will
simplify your setup while tools, such as the on-screen digital oscilloscope,
provide simplified tuning and diagnosis. Ultra Master also provides a full
array of on-screen meters and other software tools for rapid debugging and
measurement. It also keeps error messages in its own non-volatile message
buffer to save time in tracking down a problem. In systems with multiple
drives, Ultra Master can simultaneously display status and configuration
screens for all drives that are on a four-wire RS-485 link. Ultra Master can
also be used offline to configure a drive and save the setup to a disk for later
downloadingtoadrive.
PC Requirements
The minimum PC configuration required for Ultra Master software is:
• A 386-based IBM compatible PC with 2MB of available hard disk space
to load Ultra Master
• 4 MB minimum of memory
• Microsoft® Windows version 3.1 or higher
• A 3.5 in., 1.44 MB floppy disk drive
• An RS-232 serial port
• A VGA monitor
DeviceNet Option
ULTRA 100 with DeviceNet gives you the ability to operate your drive
remotely over a network. DeviceNet, an open, low-cost network based on
Controller Area Network (CAN) technology, is a device-level network that
can connect individual components, such as drives and switches. ULTRA 100
with DeviceNet supports generic object mapping and unconnected message
manager (UCMM) for dynamic and multiple explicit message connections.