Product data

20 ULTRA Series
Publication 1398-2.0 - August 1999
• When placing the cable into the cable carrier, the carrier should be laid
out flat with the bending direction facing upward. It should then be fitted
with the cables in working position. The cables should be laid into the
cable carrier and not woven between or around other cables.
• Allow at least 10% clearance between cables so that they are free to
move. Use separators between cables.
• The cables must be free to move within the carrier. Do not attach the
cables to the carrier or to each other.
• Clamp heavier cables toward the edge of the track and lighter cables in
the center of the track.
• Do not pull cables tight against the inner/outer track curves.
System Configuration Checklist
Use the following checklist to configure an ULTRA 100/200 system for your
application:
ULTRA 100/200 Drives (choose one of the following):
1
Includes the ULTRA 100 Installation Manual (Publication 1398-5.2).
2
Includes the ULTRA 200 Installation Manual (Publication 1398-5.0).
ULTRA Series Motors (choose one of the following):
ULTRA 100 Drives
1
ULTRA 200 Drives
2
!
1398-DDM-005, -005-DN
1398-DDM-005X, -005X-DN
!
1398-DDM-010, -010X
!
1398-DDM-020, -020X
!
1398-DDM-009, -009-DN
1398-DDM-009X, -009X-DN
!
1398-DDM-030, -030X
!
1398-DDM-075, -075X
!
1398-DDM-019, -019-DN
1398-DDM-0019X, -0019X-DN
!
1398-DDM-150, -150X
F-Series Motors H-Series Motors Y-Series Motors N-Series Motors
!
F-4030-Q-H00AA
!
H-2005-K-H00AA
!
Y-1002-1-H00AA
!
N-2302-1-F00AA
!
F-4050-Q-H00AA
!
H-3007-N-H00AA
!
Y-1002-2-H00AA
!
N-2304-1-F00AA
!
F-4075-R-H00AA
1
!
H-3016-N-H00AA
!
Y-1003-1-H00AA
!
N-3406-2-H00AA
!
F-6100-R-H00AA
1
!
H-4030-M-H00AA
1
!
Y-1003-2-H00AA
!
N-3412-2-F00AA
2
!
F-6200-R-H00AA
1
!
H-4030-P-H00AA
!
Y-2006-1-H00AA
!
N-3412-2-H00AA
1