Product data

16 ULTRA Series

Publication 1398-2.0 - August 1999

ULTRA Series 100/200

Cables

Use the following table to determine which cables you need for your

application. Refer to the ULTRA 100 and 200 Interconnect Diagrams section

on page 17 for cable location.

Serial interface cables for use with the ULTRA 100 drives cannot exceed 50 ft (15 m).

Note: xxx — Last three digits select standard cable length of 10 ft (3.0 m)—010;

25 ft (7.7 m)—025; 50ft (15.0 m)—050; 75 ft (25 m)—075; 100 ft (30.3 m)—100.

Interface Cables Part Number

J1 to customer-supplied connector 9101-1370-xxx

J1 to a 50-position female D-sub cable (1m/3 ft length) 9101-1369-003

J1 to 1756-MO2AE ControlLogix Analog/Encoder 1398-CCAExx

J1 to 1756-M02AE flying lead to ULTRA 100/200 molded connector, single axis (10 ft.) 1398-CFLAExx

J3 to customer-supplied connector 9101-1368-xxx

J3 to J3 (for slaving drives or torque sharing [0.3m, 1 ft]) 9101-1463-002

Serial Interface Cables

J4 or J5 to PC (RS-232 9-pin D-shell connector) 9101-1372-xxx

J4 or J5 to customer-supplied connector 9101-1379-xxx

J4 or J5 to J4 or J5 (RS-485 multi-drop communications) (30 cm/1 ft length) 9101-1374-001

Encoder Feedback Cables

J2 to F- or H-Series motors 9101-1366-xxx

F- or H-Series motor to customer-supplied connector (pig tail) 9101-1365-xxx

J2 to Y-Series motor 9101-1375-xxx

Y-Series motor to customer-supplied connector (pig tail) 9101-1373-xxx

J2 to N-Series motor 9101-1468-xxx

N-Series motor to customer-supplied connector (pig tail) 9101-1469-xxx

J2 to a 20-position female D-sub cable (1m/3ft length) 9101-1371-003

J2 to customer-supplied connector (pig tail) 9101-1380-xxx

Breakout Boards

J1 to 50-pin terminal strip (includes 3ft/1m cable and mounting hardware) 9101-1391

J2 to 25-pin terminal strip (includes 3ft/1m cable and mounting hardware) 9101-1392

Motor Power Cables

Drive to 2000 or 3000 Series motors (F- or H-Series) 9101-1381-xxx

Drive to 4000 Series motors (F- or H-Series) 9101-1382-xxx

Drive to 6000 Series motors (F- or H-Series) 9101-1383-xxx

Drive to 8000 Series motors (F- or H-Series) 9101-1384-xxx

Drive to Y-Series motors 9101-1385-xxx

1398-DDM-150, -150 drive to 6300 Series motors (F- or H-Series) 9101-1399-xxx

Drive to N-Series motors 9101-1467-xxx