Product data

Publication 1398-2.0 - August 1999
ULTRA Series 11
ULTRA 200 Features
ULTRA 200 positioning drives deliver full-featured flexibility and impressive
power and performance. Each ULTRA 200 drive provides:
• 115 to 230V AC single phase input (single phase or three phase for the
75 amp version, three phase only for the 150 amp version)
• Phase-to-phase and phase-to-ground short circuit protection
• An internal resistive shunt
• A built-in auxiliary AC input (to power logic only)
• Built-in power supplies (including 24V I/O supply)—no external source
required (except AC line)
• The ability to drive sinusoidal AC brushless motors
• An DC bus available externally for power leveling or for use of shared
power supplies
• Advanced multi-processor design for leading-edge velocity loop
bandwidth, fully digital current, velocity, and position loops
• Large-scale integration with custom ASICs and IPMs for performance
and reliability
• A 16-bit A/D convertor for precise velocity command input
• Flash memory for simple field upgrades
• A personality module to store setup parameters and simplify drive
replacement
• Reduced component count for reliability
• Internally-shielded filters for electromagnetic compatibility (EMC)
• Four dedicated I/O plus eight user-selectable, optically isolated digital
inputs and outputs (sourcing/active high):
• Two dedicated inputs
• Two dedicated outputs
• Four user-selectable inputs
• Four user-selectable outputs
• Two analog inputs for external current limit
• Two analog outputs for variable monitoring or torque sharing