User guide

Chapter 2-First Time Installation and Configuration
2-18
— Fasten the RMX to the rack with screws through the eight holes
in the RMX’s front mounting brackets.
• Using a shelf
— Install the shelf, supplied by the rack manufacturer, in the rack.
— Mount the RMX on the shelf.
— Fasten the RMX to the rack with screws through the four holes in
the RMX’s front mounting brackets.
Connecting the RMX 4000 to the Power Sources
Connect the following power cables to the RMX 4000 back panel:
The size of the protective earthing conductor & cable should be a minimum of
10AWG.