User guide

Chapter 2-First Time Installation and Configuration
2-16
• Using a shelf
— Install the shelf, supplied by the rack manufacturer, in the rack.
— Mount the RMX on the shelf.
— Fasten the RMX to the rack with screws through the four holes in
the RMX’s front mounting brackets.
Connecting Cables to the RMX 2000
Connect the following cables to the back panel:
•Power cable
— On the RTM IP card connect the LAN cable to LAN 2 Port.
(Optional) Connect the LAN cable to LAN 1. For more
information, see RMX 1500/2000/4000 Administrator’s Guide,
"LAN
Redundancy” on page 14-46
.
Do not remove the protective caps from LAN1, LAN3 and ShMG ports.