User guide

Chapter 2-First Time Installation and Configuration
2-14
Connecting Cables to the RMX 1500
To connect the cables:
•For the RTM IP 1500 module:
— Connect the Media cable to LAN 2 port.
(Optional) Connect the LAN cable to LAN 1. For more
information, see RMX 1500/2000/4000 Administrator’s Guide,
"LAN
Redundancy” on page 14-46
.
— Connect the Network cables to the MNG (Signaling) port &
MNGB (Management Network) port.
— (Optional) Connect the Shelf Management cable to the Shelf port.
•For the RTM ISDN 1500 module:
— Connect the E1/T1 cables to their PRI (1-4) ports.
Figure 2-1 RMX 1500 Rear Panel View with AC Power and Communication
Cables
E1/T1 PRI
Connection(s)
Power Cable
LAN 2 - media; MNG - signaling;
MNG B - management & Shelf
The LAN 1, LAN3, LAN4 and Modem ports are not be used and the plastic caps
covering those ports should not be removed.