User guide

Chapter 3-Basic Operation
3-102
To control a far camera:
1 Use the Up/Down arrow keys to select Camera Control in the Main
Menu and then press the Right arrow or # key to confirm your
selection.
or
Press the 4 key on the Remote Device.
The Camera Control sub menu is displayed.
2 Use the Up/Down/Left/Right arrow keys to select the far camera to
be controlled.
A colored frame is displayed around the selected cell in the video
layout.
3 Use the Zoom In key to activate FECC.
Following a 10 second delay, the FECC active icon ( ) is displayed
in the video image of the selected site.
Selected Cell for
Far End
Camera Control