User guide

Polycom RMX 1500/2000/4000 Getting Started Guide
3-97
DTMF codes are entered using the Remote Device Numerics Keys and are
defined as follows:
PCM Main Menu - Level 1
Click&View
With the Click&View application, participants can change their Personal
Layouts using the Arrow Keys or DTMF codes entered using the Numeric
Keys of their endpoints.
For a full description of Click&View see "Personal Layout Selection with
Click&View” on page 3-84.
Invite Participant
This function is not available to chairpersons using PCM with ISDN
endpoints.
Table 3-12 PCM - DTMF Codes
Numeric Key Description
0
• Number input.
• Shortcut key to a numbered menu option - when
conference video or the PCM menu is displayed.
• Return to the conference - when in FECC mode.
1-9
• Number input.
• Shortcut key to a numbered menu option - when the
conference video or the PCM menu is displayed.
• Initiate PCM session on ISDN/PSTN endpoint (1 is the
default for the Start PCM DTMF Code).
*
• Initiate DTMF mode (with Polycom endpoints) - during
a conference or when the PCM menu is displayed.
• Enter a period “.” - while entering an IP address.
# Confirm selection and send information to the RMX.