User guide

Chapter 3-Basic Operation
3-52
Additional information about the conference can be viewed when
accessing the conference properties.
To monitor a conference:
>> In the Conference List pane, double click the name of the conference
you wish to monitor, or right-click the conference and then click
Conference Properties.
Start Time Conference start time.
End Time The time the conference is expected to end.
Dial in Number(1) The Conference dial in number for ISDN/PSTN
participants.
SIP Registration The status of registration with the SIP server:
• Not configured - Registration with the SIP Server
was not enabled in the Conference Profile assigned to
this conferencing Entity. In Multiple Networks
configuration, If one service is not configured while
others are configured and registered, the status
reflects the registration with the configured Network
Services. The registration status with each SIP Server
can be viewed in the Properties - Network Services
dialog box of each conferencing entity.
• Failed - Registration with the SIP Server failed. This
may be due to incorrect definition of the SIP server in
the IP Network Service, or the SIP server may be
down, or any other reason the affects the connection
between the RMX or the SIP Server to the network.
• Registered - the conferencing entity is registered with
the SIP Server.
• Partially Registered - This status is available only in
Multiple Networks configuration, when the
conferencing entity failed to register to all the required
Network Services if more than one Network Service
was selected.
Table 3-5 Conferences – Monitoring Information (Continued)
Field Description