User manual

Publication 2092-UM001D-EN-P — July 2005
Specifications and Dimensions A-3
DC Bus and Shunt Circuitry
DC Power and Shunt Connector
Output Power
Output Power Connector
Drives 2092-DA1 2092-DA2 2092-DA3 2092-DA4 2092-DA5
Voltage 254
–400 VDC
Capacitance 660 µF990 µF
Discharge Time (to < 50V) 3 minutes, maximum
Overvoltage Detect 410V
Undervoltage Detect 230V
Shunt Circuitry No Yes
Shunt Turn-on Voltage – 390V
Shunt Turn-off Voltage – 380V
Internal Shunt Resistance –
50
Ω 30Ω
Continuous Shunt Power – 30W 50W 70W
Intermittent Shunt Power – 3kW 5kW
Description Pluggable cage-clamp, 7.5mm spacing
Manufacturer Wago 231-204/026-000
Acceptable Wire Gauge 14–20 AWG
Operating Tool Wago 231-131
Pinout
DC Bus and Shunt Power Connectors are described beginning on
page 2-25
Drives 2092-DA1 2092-DA2 2092-DA3 2092-DA4 2092-DA5
Continuous Output Current
1.4 Apeak,
maximum
2.4 Apeak,
maximum
4.7 Apeak,
maximum
10.7 Apeak,
maximum
16.4 Apeak,
maximum
Intermittent Output Current
3.4 Apeak,
maximum
7.2 Apeak,
maximum
11.3 Apeak,
maximum
24.8 Apeak,
maximum
43.4 Apeak,
maximum
PWM Frequency 10 kHz
Internal Power Dissipation (not
including internal shunt
dissipation)
50W, maximum 100W, maximum 150W, maximum
Description Pluggable cage-clamp, 7.5mm spacing
Manufacturer Wago 231-203 /026-000
Acceptable Wire Gauge 14–20 AWG
Operating Tool Wago 231-131
Pinout Refer to Motor Power Connectors on page 2-26