Install guide

INSTALL GUIDE PAGE 14
The system reset will clear any changes made to the Program Menu
as well as the Tach setting.
1) Turn the ignition key from “Off” to “On” 3 times, ON-OFF-ON-OFF-
ON within three seconds. (Leave the key in the ON position)
2) Press and release the Program Button located on the antenna.
The park lights will turn on and the siren or horn (optional) will chirp
one time.
3) Then press and hold the Program Button until the park lights
flash and the siren or horn (optional) will chirp 3 times slowly to
confirm system reset. System is now reset to factory defaults.
NOTE: System Reset does not delete the remote transmitter codes
from memory.
Important! When the system reset is complete, the system must be
Auto Tach/Tachless learned before the remote starter will operate.
System Reset