Technical data

90 Agilent 1290 Infinity LC System Manual and Quick Reference
5 Quick Start Guide
About the Quick Start Guide
About the Quick Start Guide
This chapter provides information on running the Agilent 1290 Infinity LC
system. It can be used as a guide to quickly running a first analysis after
installation, serving both as a tutorial example and a check on the overall
functioning of the system. It also includes more detailed information about
method parameters.
This example demonstrates setting up and running an analysis using the
column and checkout sample provided with the Agilent 1290 Infinity LC
system. The example refers to menus and commands in OpenLAB CDS
ChemStation Edition, but identical functions are also available on the
alternative control options including OpenLAB CDS EZChrom Edition, Instant
Pilot controller, and MassHunter software.
NOTE
The starting point assumes that the system has been installed, turned on and initially
primed (see “Priming the Pump” on page 83). The UV lamp should be turned on at least 30
minutes before starting any quantitative work.