ENGINEERING REVISIONS −for− DC−SAPR A A A TJL UPDATED RAINWHEEL AND CONNECTION; REPLACED DETAIL 005 WITH DETAIL 002, REPLACED DETAIL 006 WITH DETAIL 086; IN PARTS LIST, REMOVED YELLOW PLASTIC CAP (02-08-0037); RAINWHEEL BUSHING (02-08-0128); PLASTIC SPACER (02-08-0129); TJL CHANGED QTY OF M8 FLAT WASHER (33-11-0300) FROM 17 TO 16; M8 LOCK NUT (33-11-0500) FRIM 4 TO 3; REPLACED RAINWHEEL MOUNTING BRACKET (02-08-0127) WITH BONGOS MOUNTING BRACKET (02-08-0104); ADDED (1) M8 x 1 3/16" B.H.C.S.
DC-SAPLING w/ROOF MODEL # DC-SAPR Issued/Revised: 01/31/19 800.458.5872 www.ultraplay.
DC-SAPLING w/ROOF Dear Discovery Centers™ Customer, Thank you for choosing to purchase and install a Discovery Centers commercial playsystem by UltraPlay®. We appreciate the confidence you have placed in our company, and we will strive to earn your trust. This is your Owner's Manual & Assembly Instructions booklet. We have designed this manual specifically for the products that you have purchased.
GENERAL COMMERCIAL PLAYGROUND SAFETY GUIDELINES IMPORTANT: This structure is designed to comply with the ASTM F2373 standard for users 6 months through 23 months of age. Maintaining your playground equipment and its surrounding area is essential to minimizing the risk of injury to users as well as maximizing its useful lifespan.
GENERAL COMMERCIAL PLAYGROUND SAFETY GUIDELINES OVERHEAD OBSTRUCTIONS: Overhead obstructions (for example, exterior obstructions such as tree limbs and interior lights) within the use zones of play structures shall be a minimum 84 inches (2130 mm) above each designated play surface outdoors and a minimum of 48 inches (1220 mm) above each designated play surface indoors.
GENERAL COMMERCIAL PLAYGROUND SAFETY GUIDELINES ROUTINE MAINTENANCE: Regularly inspect and maintain your playground equipment and its surrounding area to help ensure the safety of the user. Proper maintenance of Discovery Centers equipment includes using the accompanying Playground Maintenance Checklist found in this booklet to identify areas requiring repairs or replacement, and barricading the equipment to prevent use while corrections are being made.
GENERAL COMMERICAL PLAYGROUND SAFETY GUIDELINES -Check crush points (exposed mechanisms, junctures of moving components) and eliminate. -Check for broken supports or anchors. Check for stability in ground. Structures should not be easily swayed; connections should be solid and adequately secured. -Check all posts in ground for corrosion below grade. -When flexible components are anchored in the ground, check and make sure anchoring devices are below finish grade.
WARRANTY UltraPlay warrants its products to be free from defects in materials and/or workmanship, subject to normal usage and installation, for a period of 1-year from the date of shipment to the original purchaser. In the event of a claim under this warranty, UltraPlay will replace the component at no cost within the first 12 months from date of shipment to the original customer.
WARRANTY EXCLUSIONS All warranties specifically exclude damage caused by man-made or natural disasters, vandalism, negligence, improper installation or improper use, modification, changes in appearance resulting from weathering, scratches, dents, discoloration, normal wear and tear, or marring as a result of public or private use. Claims are limited to replacement of equipment only and do not include any costs associated with labor, removal, or installation of the original or replacement product.
GENERAL INTRODUCTION TO INSTALLATION INSTRUCTIONS IMPORTANT! Please read the entire Installation Instructions packet before beginning the installation. UltraPlay has designed Discovery Centers to take advantage of all Consumer Product Safety Commission (CPSC) and ASTM guidelines in force at the time of purchase in an effort to prevent playground accidents.
GENERAL INTRODUCTION TO INSTALLATION INSTRUCTIONS 2. Refer to the Use Zone to ensure this structure will fit into your actual site area. Note the Minimum Area Required measurements to determine clear space required. A minimum of 3' clearance is required between any obstacles and your structure. (Refer to ASTM F2373) 3. Site selection should include considerations of what is a safe and appropriate play area: -A level and clear site is ideal, free of power lines or electrical equipment.
TOOLS REQUIRED Issued/Revised: 01/31/19 800.458.5872 www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 HARDWARE REFERNECE M8 B.H.C.S. Bolts 13mm 20mm 25mm 1/2" 3/4" 1" (33-11-0101) (33-11-0102) (33-11-0103) 100mm 70mm 50mm 45mm 40mm 35mm 30mm 4" 2-3/4" 2" 1-3/4" 1-9/16" 1-3/8" 1-3/16" (33-11-0104) (33-11-0105) (33-11-0106) (33-11-0109) (33-11-0114) (33-11-0107) (33-11-0108) M10 B.H.C.S.
USE ZONE 3' PLATFORM TOP VIEW RAINWHEEL 3' SHAPES PANEL w/INSERT CLOCK PANEL BONGOS 3' WINDOW PANEL ROOF SHORT STRAIGHT SLIDE 19'-6 3/8" 3' REVERSED GEAR PANEL PLATFORM PLAY RAMP 3' 14'-5 1/4" MINIMUM USE ZONE* REQUIRED *The USE ZONE is the area beneath and immeiately adjacent to a play structure or equipment that is designed for unrestricted circulation around the equipment and on whose surface it is predicted that a user would land when falling from or exiting the equipment.
ELEVATION VIEW 13'-6 1/4" 9'-1 1/2" ELEVATION VIEW Issued/Revised: 01/31/19 800.458.5872 www.ultraplay.
USE ZONE WITH POST PLACEMENT/HOLE LOCATIONS 87 5/8 in [222.64 cm] 15 15/16 in [40.50 cm] 14 9/16 in [37.00 cm] 53 11/16 in [136.44 cm] 21 5/8 in [54.85 cm] TYP. PLATFORM 15 15/16 in [40.50 cm] SHORT STRAIGHT SLIDE 45 1/8 in [114.55 cm] TYP. GEAR CLOCK PANEL PANEL 31 7/8 in [81.00 cm] 31 7/8 in [81.00 cm] WINDOW PANEL 150 3/8 in [381.99 cm] 45 3/8 in [115.25 cm] PLAY RAMP 15 15/16 in [40.50 cm] 43 3/16 in [109.
FOOTING DETAIL - SURFACE MOUNT (02-08-0169) PLAY RAMP MOUNTING BRACKET Parts List Footing Package -for- Sapling Surface Mount (02-08-0169) ITEM DESCRIPTION QTY PART NUMBER 1 3 02-08-0122 FOOTER PLATE 2 FOOTBUCK ASSEMBLY 8 02-08-0139 3 1 02-08-0155 SLIDE SURFACE MOUNT BRACKET 4 M10 x 35mm (1 3/8") BHCS BOLT 4 33-11-0005 5 16 33-11-0010 M10 x 50mm (2") BHCS BOLT 6 M10 LOCK NUT 4 33-11-0400 7 M10 T-NUT 16 33-11-0402 8 CONCRETE ANCHOR 24 33-11-0702 083 4 6 011 1 CONCRETE 8 GRAVEL PLATFORM MOUNTING BRAC
0 INCH 1 2 0 CM 1 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 FOOTING DETAIL - SURFACE MOUNT 1. Attach Upright Posts to Footbuck Ass'ys using M10 x 50mm B.H.C.S. and M10 T-Nut. Be sure to use the bottom two holes in Footbuck Ass'y. See Detail 009. Peen T-Nut using hammer to conform around Upright Post. 2. Attach Platform Mounting Bracket to Footer Plate using M10 x 35mm B.H.C.S. and M10 Lock Nut. See Detail 012. 3.
FOOTING DETAIL - ONGROUND (02-08-0170) SLIDE MOUNTING BRACKET 016 Parts List Footing Package -for- Sapling Onground (02-08-0170) ITEM PART NUMBER DESCRIPTION QTY 1 GROUND SPIKE 24 02-07-0048 2 8 02-08-0139 FOOTBUCK ASSEMBLY 3 SLIDE ON-GROUND BRACKET 1 02-08-0156 4 3 02-08-0161 PLATFORM ONGROUND BRACKET 5 M10 x 35mm (1 3/8") BHCS BOLT 4 33-11-0005 6 16 33-11-0010 M10 x 50mm (2") BHCS BOLT 7 M10 LOCK NUT 4 33-11-0400 8 M10 T-NUT 16 33-11-0402 3 8 7 5 7 SURFACING 008 1 UPRIGHT POST 5 GROUND 009 6
0 INCH 1 0 CM 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 FOOTING DETAIL - ONGROUND 1. Attach Upright Posts to Footbuck Ass'ys using M10 x 50mm B.H.C.S. and M10 T-Nut. Making sure to use the top two holes in Footbuck Ass'y. See Detail 009. Peen T-Nut using hammer to conform around Upright Post. 2. Attach Platform Mounting Bracket to Platform Onground Bracket using M10 x 35mm B.H.C.S. and M10 Lock Nut. See Detail 010. 3.
FOOTING DETAIL - IN-GROUND (02-08-0171) Parts List Footing Package -for- SAPLING INGROUND (02-08-0171) ITEM PART NUMBER DESCRIPTION QTY 1 8 02-08-0139 FOOTBUCK ASSEMBLY 4 2 FOOTBUCK 02-08-0162 3 16 33-11-0003 M10 x 25mm (1") BHCS BOLT 4 4 M10 x 35mm (1 3/8") BHCS BOLT 33-11-0005 5 20 33-11-0400 M10 LOCK NUT 5 4 SURFACING 017 2 3 1 CONCRETE UPRIGHT POST 013 SLIDE MOUNTING BRACKET 5 GROUND SURFACING PLATFORM MOUNTING BRACKET 45° REF. TYP. CONCRETE 12 in [30.48 cm] TYP.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 FOOTING DETAIL - IN-GROUND 1. Attach Upright Post to Footbuck Ass'y using M10 x 25mm B.H.C.S. and M10 Lock Nut. Refer to page 18 for Hole/Footer location. See Detail 013. 2. Attach Platform Mounting Bracket to Footbuck using M10 x 35mm B.H.C.S. and M10 Lock Nut. See Detail 014. 3. Attach Slide Mounting Bracket to Footbuck using M10 x 35mm B.H.C.S. and M10 Lock Nut. See Detail 017. 4.
DC-SAPLING w/ROOF Parts List DESCRIPTION ROOF CLIMBER HANDHOLD-ODD SEEDLING DECK B w/6 INSERTS FOOTER COVER CLOCK PANEL (BLUE) PLATFORM BONGOS RAINWHEEL POST CAP UPPER POST COVER, 7 3/8" LG. UPPER POST COVER, 21 3/8" LG. UPPER POST COVER, 14 1/2" LG. LOWER POST COVER, 7 3/16" LG.
DC-SAPLING w/ROOF Parts List DESCRIPTION M8 x 50mm (2") BHCS BOLT M8 FLATWASHER M8 LOCK NUT M8 BARREL NUT M10 x 25mm (1") BHCS BOLT M10 x 50mm (2") BHCS BOLT M10 x 60mm (2 3/8") BHCS BOLT M10 FLATWASHER M10 LOCKWASHER M12 LOCKWASHER RIVET QTY 2 16 3 10 30 4 4 20 13 20 1 PART NUMBER 33-11-0114 33-11-0300 33-11-0500 33-11-0501 33-11-0003 33-11-0010 33-11-0007 33-11-0200 33-11-0201 33-11-0203 33-11-0700 Unless Otherwise Specified, All Units of Measure are Each Items listed below Hardware Complete line are i
DC-SAPLING w/ROOF ROOF (02-08-0001) UPPER POST COVER 28 7/8" w/3 INSERTS (02-08-0084) UPPER POST COVER 28 7/8" w/4 INSERTS (02-08-0182) CLOCK PANEL (02-08-0011) 007 POST CAP (02-08-0027) PLAY RAMP (02-08-0059) CURVED LEAF CONNECTOR w/RECESS (02-08-0183) POST CAP (02-08-0027) REVERSED GEAR PANEL (02-08-0172) HANDHOLD-EVEN (02-08-0143) WARNING LABEL 019 SPROUT DECK w/8 INSERTS (02-08-0142) SLIDE HOOD w/6 INSERTS (02-08-0173) DC-SAP DECK A w/2 INSERTS (02-08-0083) 021 020 UNDERNEATH PLATFORM (02-
DC-SAPLING w/ROOF ROOF (02-08-0001) UPPER POST COVER 28 7/8" w/4 INSERTS (02-08-0182) UPPER POST COVER 28 7/8" w/3 INSERTS (02-08-0084) 007 180° CORNER CONNECTOR (02-08-0101) POST CAP (02-08-0027) CURVED LEAF CONNECTOR (02-08-0149) 021 PLATFORM (02-08-0022) 24" WAVY SLIDE (02-08-0138) REVERSED GEAR PANEL (02-08-0172) 003 PLAY RAMP (02-08-0059) SPROUT DECK w/8 INSERTS (02-08-0142) 004 002 039 BONGOS (02-08-0025) WINDOW PANEL (02-08-0147) DC-SAP DECK A w/2 INSERTS (02-08-0083) 082 UNDERNEATH
0 INCH 0 CM 1 1 2 3 2 3 5 4 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 1 1. Determine the mounting option being installed. 2. Place Mounting Brackets, Lower Posts, and Upright Posts in correct location according to the top view. IMPORTANT: Depending on mounting options: surface mount, in-ground, or on-ground, footing plates must be installed at this time. Refer to pages 19-24. LOWER POST, 22 11/16" LG.
0 INCH 0 CM 1 1 2 3 2 3 5 4 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 2 1. Attach Platform Mounting Brackets to Platforms using M10 x 25mm B.H.C.S., M12 Lockwasher, and M10 Flat Wahser. See Detail 001. 2. Slide Platform onto Upright Posts. 3. Slide Lower Post Covers onto Lower Posts. PLATFORM PLATFORM MOUNTING BRACKET M10 FLATWASHER (33-11-0200) M12 LOCKWASHER (33-11-0203) M10 x 25mm (1") BHCS BOLT (33-11-0003) LOWER POST, 22 11/16" LG.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 3 1. Slide Sprout Deck and DC-Sap Deck A onto Upright Posts and Lower Posts. IMPORTANT: Orientation of drilled holes in deck is critical. LOWER POST, 22 11/16" LG. (02-08-0152) IMPORTANT: ORIENTATION OF DRILLED HOLES IN DECK IS CRITICAL UPRIGHT POST, 51 7/8" LG. (02-08-0141) DC-SAP DECK A w/2 INSERTS (02-08-0083) LOWER POST, 22 11/16" LG.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 4 1. Slide Seedling Deck B onto Lower Posts. IMPORTANT: Orientation of squares in deck is critical. LOWER POST, 22 11/16" LG (02-08-0152) IMPORTANT: ORIENTATION OF SQUARES IN DECK IS CRITICAL. SEEDLING DECK B w/6 INSERTS (02-08-0006) Issued/Revised: 01/31/19 800.458.5872 www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 5 1. Slide Handhold Brackets over Upright Posts. Align the pipe on the Handhold Bracket with the hole in the Deck. UPRIGHT POST, 51 7/8" LG. (02-08-0141) SPROUT DECK w/8 INSERTS (02-08-0142) HANDHOLD BRACKET (02-08-0140) Issued/Revised: 01/31/19 800.458.5872 www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 6 1. Slide Shapes Panel and Handhold-Even onto the Upright Posts, making sure that the pipes on the Handhold Brackets are inserted into the bottom holes of the Handholds correctly. IMPORTANT: Panels and Handholds must slide over Upright Post simultaneously. UPRIGHT POST, 51 7/8" LG. (02-08-0141) HANDHOLD-EVEN (02-08-0143) SHAPES PANEL w/INSERT (02-08-0174) Issued/Revised: 01/31/19 800.458.5872 www.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 7 1. Slide Clock Panel and Handhold-Even onto the Upright Posts, making sure that the pipes on the Handhold Brackets are inserted into the bottom holes of the Handholds correctly. IMPORTANT: Panels and Handholds must slide over post simultaneously. Warning label must be positioned outwards. CLOCK PANEL (02-08-0011) UPRIGHT POST, 51 7/8" LG.
0 INCH 0 CM 1 1 2 3 2 3 5 4 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 8 1. Lift left side of Shapes Panel w/Insert and slide Bongos Mounting Bracket under Shape panel. 2. Attach Bongos Mounting Bracket to Deck using M10 x 25mm B.H.C.S., M12 Lock Washer, and M10 Flat Washer. See Detail 002. 3. IMPORTANT: Apply loctite adhesive to threads of stud. 4. Attach Rainwheel to Bongos Mounting Bracket using M8 x 30 B.H.C.S. and M8 Barrel Nut. See Detail 086.
0 INCH 0 CM 1 1 2 3 2 3 5 4 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 9 1. Slide Window Panel and Slide Hood w/6inserts into place. WINDOW PANEL (02-08-0147) SLIDE HOOD w/6 INSERTS (02-08-0173) Issued/Revised: 01/31/19 800.458.5872 www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 10 1. Lift Seedling Deck B w/8 inserts and slide Bongos Mounting Bracket under Seedling Deck B w/8 Inserts. 2. Attach Bongos Mounting Bracket to Deck using M10 x 25mm B.H.C.S., M12 Lock Washer, and M10 Flat Washer. See Detail 002. 3. Attach Bongos to Bongos Support Bracket using Mounting Bar, M8 x 20mm B.H.C.S., M10 Lock Washer, M8 Flat Washer, and M8 Lock Nut.
0 INCH 0 CM 1 1 2 3 2 3 5 4 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 10 CONT'D 4. Apply loctite adhesive to threads of bolt. 5. Attach Bongos Support Bracket to Bongos Mounting Bracket using M8 x 25mm B.H.C.S. and M8 Barrel Nut. See Detail 004. 6. Drill Ø1/4" hole through Bongos Mounting Bracket and Bongos Support Bracket to install Rivet. See Detail 039.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 11 1. Slide Reversed Gear Panel into place. REVERSED GEAR PANEL (02-08-0172) Issued/Revised: 01/31/19 800.458.5872 www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 12 1. Slide Handhold Bracket over the Lower Post. Align pipe of the Handhold Bracket with the hole in the Deck. LOWER POST, 21 11/16" LG. (02-08-0152) DC-SAP DECK A w/2 INSERTS (02-08-0083) HANDHOLD BRACKET (02-08-0140) Issued/Revised: 01/31/19 800.458.5872 www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 13 1. Slide Climber Handhold-Odd over Lower Post, making sure the pipe of the Handhold Bracket is inserted into bottom hole of the Climber Handhold-Odd correctly. CLIMBER HANDHOLD-ODD (02-08-0004) LOWER POST, 22 11/16" LG. (02-08-0152) Issued/Revised: 01/31/19 800.458.5872 www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 14 1. Slide Play Ramp and Upper Post Covers into place. UPPER POST COVER, 7 3/8" LG. (02-08-0033) UPPER POST COVER, 14 1/2" LG. (02-08-0039) UPPER POST COVER, 7 3/8" LG. (02-08-0033) PLAY RAMP (02-08-0059) Issued/Revised: 01/31/19 800.458.5872 www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 5 4 7 6 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 15 1. Slide Upper Posts through the Panels, Climber Handhold-Odd, Upper Covers, and Play Ramp and attach to Lower Posts. 2. Use "T" Tool , turn clockwise to tighten Upper Post, 29 1/8" LG. to Lower Posts. 3. Tighten Upper Post, 60" lg. to Lower Posts. UPPER POST, 29 1/8" LG. (02-08-0189 UPPER POST, 60" LG.
0 INCH 1 2 0 CM 1 3 2 3 5 4 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 16 1. Attach Mounting Bracket to Play Ramp using M10 x 25mm B.H.C.S., M12 Lock Washer, and M10 Flat Washer. See Detail 082. 2. Attach Play Ramp to Deck using M10 x 60 mm B.H.C.S., M12 Lock Washer, and M10 Flat Washer. See Detail 020.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 17 1. Attach Slide Mounting Bracket to Slide using M10 x 25mm B.H.C.S., M12 Lock Washer, and M10 Flat Wahser. See Detail 018. 2. Attach Slide to Slide Hood using M8 x 50mm B.H.C.S, M10 Lock Washer, and M8 Flat Washer. See Detail 019.
0 INCH 0 CM 1 1 2 3 2 3 4 5 7 6 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 17 CON'D 3. Attach Slide to Deck using M10 x 60mm B.H.C.S. Bolt, M12 Lock Washer, and M10 Flat Washer. See Detail 020.
0 INCH 0 CM 1 1 2 3 2 3 5 4 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 18 1. Place Upper Post Covers on to Upright Posts. 2. Attach 180 Degree Corner Connector to Slide Hood and Upper Post Cover 28.88" w/3 Inserts using M10 x 25mm B.H.C.S. Bolt. See Detail 021. Orientation of 180 Degree Corner Connector is critical. Refer to Detail A. 3. Attach 180 Degree Corner Connector to Slide Hood and Shapes Panel using M10 x 25mm B.H.C.S. Bolt. See Detail 021.
0 INCH 0 CM 1 1 2 3 2 3 5 4 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 18 CONT'D CURVED LEAF CONNECTOR (02-08-0149) 180 DEGREE CORNER CONNECTOR (02-08-0101) UPPER POST COVER 28 7/8" w/3 INSERTS (02-08-0084) 021 DETAIL A UPPER POST, 60 LG. (02-08-0160) UPPER POST COVER, 21 3/8" LG.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 19 1. Attach Post Caps to Upright Post using M10 x 50mm B.H.C.S. See Detail 007. 2. Centered horizontally with Upright Post, measure 1" up from bottom of Roof and drill 1/8" pilot hole through Roof and Post Cover. See Detail 023. M10 x 50mm (2") BHCS BOLT (33-11-0010) POST CAP (02-08-0027) M5 x 76mm (3") SELF-TAPPING SCREW (33-11-0600) UPRIGHT POST ROOF 1 in [2.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 19 CONT'D 3. Attach Roof to Upright Posts and Upper Post Covers using M5 x 76mm Self-Tapping Screw. See Detail 024. ROOF DRILL Ø1/8" PILOT HOLE UPRIGHT POST M5 x 76mm (3") SELF-TAPPING SCREW (33-11-0600) ROOF (02-08-0001) POST COVER 024 007 POST CAP (02-08-0027) 023 024 UNDERNEATH Issued/Revised: 01/31/19 800.458.5872 www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 DC-SAPLING w/ROOF STEP 20 1. After entire unit is assembled attach Footer Covers to Lower Post Covers using M8x 40mm B.H.C.S., M10 Lock Washer, M8 Flat Washer, and M8 Barrel Nut. See Detail 022. 2. Refer back to your Footing Detail options on pages 19 to 24 to finish assembly.
