Full Product Manual

SPECIFIC OPERATION WARNINGS
1. Exercise care when handling the cable reel during normal operation. Cord reels have a rotating
drum powered by a spring under tension.
2. Do not use cord different than what is supplied with this reel. Changes in diameter, weight per
foot, length of cord or flexibility will affect the operation of the reel.
3. Mounting hardware and fasteners should be installed to maintain tightness under vibration and
checked periodically to ensure tightness. Mounting hardware and faste
ners not included.
4. Ensure that only the qualified electrician can installs/services this cord reel. And it must not be
used by children or unskilled persons.
5. Ensure that power supply voltage does not exceed the maximum voltage rating of the reel.
6. Ensure that the reel is properly installed before connecting to power supply.
7. Ensure that all electrical power is disconnected from reel before servicing.
8. Check for frayed or broken wires before each use.
9. Whe
n pulling the electrical cord from the reel always grasp the electrical cord itself, not the
work device.
10. Disconnect power from the reel immediately if any malfunction occurs.
11 Never remove, tamper with or cut out the safety devices fitted by the manufacture.
12. Do not use the reel in damp or wet conditions. Avoid getting debris in the cord reel.
WORK AREA SAFETY
1. Keep work area clean, dry, free of clutter, and well lit. Cluttered, wet, or dark work areas can
result in injury. Using the tool in confined work areas may put you dangerously close to other
cutting tools and rotating parts.
2. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your
work area. Some of these hazards may be below the work surface hidden from your view and
may cause personal harm or property damage if unintentionally c
ontacted.
PERSONAL SAFETY
1. Stay alert, watch what you are doing, and use common sense when operating the reel. Do not
use the reel while you are tired or under the influence of drugs, alcohol, or medication. A moment
of inattention while operating the tool may result in serious personal injury.
2. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caug
ht.
3. Use ANSI-approved safety goggles or safety glasses with side shields, or when needed, a face
shield. Use a dust mask in dusty work conditions. Also use non-skid safety shoes, hardhat,
gloves, dust collection systems, and hearing protection when appropriate.
4. Do not overreach. Keep proper footing and balance at all times.
5. Never remove, tamper with or cut out the safety devices fitted by the manufacturer.
[e-mail]
3
1-800-348-5004