Use and Care Manual

4. Use the Left/Right button to view PIDs
of next or previous frames.
6 of 135 frame
4
DTC_CNT 0
FUELSYS1 OL
FUELSYS2 N/A
LOAD_PCT(%) 0.0 ?
ETC( ) -40
SHRTFT1(%) 99.2
Figure 5.30
5.4 Viewing Freeze Frame Data
Freeze Frame Data allows the technician to view the vehicle's
operating parameters at the moment a DTC is detected. For
example, the parameters may include engine speed (RPM),
engine coolant temperature (ECT), or vehicle speed sensor (VSS)
etc. This information will aid the technician by allowing the
parameters to be duplicated for diagnostic and repair purposes.
1. To view freeze frame data, use the Up/Down scroll
button to select View Freeze Frame from Diagnostic
Menu and press the OK button. (See Figure 5.4)
2. Wait a few seconds while the Scan
Tool validates the PID MA
P.
3. If retrieved information covers more than one screen, use the
DOWN scroll button, as necessary, until
all the data appears.
[e-mail]
52
1-800-348-5004