Use and Care Manual

2. Use the Up/Down scroll button to select a
trigger mode and press the OK button.
…….……Pick T
r
i
g
g
er Mode 1/2
Manual Trigger
DTC Trigger ?
Figure 5.21
• If data from previously tested vehicle is not erased, data
from current test will be stored in a temporary cache.
3. Use the Up/Down scroll button to select a
memory location and press the OK button.
…………….Select Memory 1/3..
Location #1 *
Location #2
Location #3 ?
Figure 5.22
• The asterisk (*) icon on the screen indicates that there
is a previous recording in the memory location.
[e-mail]
46
1-800-348-5004