Full Product Manual

3. If the test has been initiated by the vehicle, a confirmation
message will be displayed on the screen.
Component Test
Command Sent!
Press any key to con.
Figure 5.48
Some vehicles do not allow scan tools to control vehicle systems
or components. If the vehicle under test does not support the EVAP
Leak Test, an advisory message is displayed on the screen.
.............Component Test
The selected mode is
not supported
Press any key to con.
Figure 5.49
5.9 Viewing Vehicle Information
The Vehicle Info. function enables retrieval of Vehicle
Identification No. (VIN), Calibration ID Nos. (CINs), Calibration
Verification Nos. (CVNs) and In-use Performance Tracking
on 2000 and newer vehicles that support Mode 9.
[e-mail]
67
1-800-348-5004