Full Product Manual

• If you decide to deselect these items, press OK; if you
decide not to, press the ESC button, or use the Up/Down
button to select NO and press OK to continue PID selections.
4. Use the Up/Down scroll button to select a trigger
mode and press the OK button. (See Figure 5.21)
• If data from a previously tested vehicle is not erased,
data from current test will be stored in temporary cache.
5. Use the Up/Down scroll button to select a memory
location and press the OK button. (See Figure 5.22)
•The asterisk (*) icon on the screen indicates that there
is a previous recording in the memory location.
• If you select a location marked with an asterisk
(*) icon, a message prompting to overwrite old
recording is displayed. (See Figure 5.23)
• If you wish to proceed with overwriting old recording,
press the OK button; if you do not wish to
overwrite it, press
the ESC button, or use the Left/Right button to select
NO and press OK to pick another memory location.
6. Continue from step 4.
Playback Data
The Playback Data function allows viewing
of previously stored PID data.
1. To playback recorded data, use the Up/Down scroll
button to select Playback Data from Live Data menu
and press the OK button. (See Figure 5.12)
• You are also allowed to playback recorded
data immediately after recording.
[e-mail]
50
1-800-348-5004