Full Product Manual

• If DTC Trigger is selected, following screen shows:
………………….DTC Trigger……………..
Waiting for DTC to
trigger recording…
Press [ESC] to exit
Figure 5.25
5. Wait for DTC to trigger recording or
press OK to start recording.
Note:
Drive until a DTC is detected when DTC
Trigger is selected. If no DTCs are detected,
press ESC to exit recording.
…….Recording…. 5/46 …..
DTC_CNT 0
FUELSYS1 0L
FUELSYS2 -- ?
LO
A
D
_
PC
T
(%) 0.0
ETC( ) -40
SHRTFT1(%) 99.2
Figure 5.26
•
The number “x/x...” to the upper right corner of the
screen indicates the maximum frames that can be
recorded and the number of recorded frames.
6. The Scan Tool keeps recording PID data until user
presses the ESC button, selected memory location
is full, or it completes recording. A message
prompting to playback data shows on the screen.
[e-mail]
48
1-800-348-5004