Full Product Manual

• If the manufacturer of your vehicle is not listed, use the Up/
Down scroll button to select Other and press the OK button.
5.2 Erasing Codes
CAUTION: Erasing the DTCs may allow the Scan Tool to delete
not only the codes from the vehicle’s on-board computer,
but also Freeze Frame Data and manufacturer specific
enhanced data. Further, the I/M Readiness Monitor
Status for all vehicle monitors is reset to Not Ready or
Not Complete status. Do not erase the codes before the
system has been checked completely by a technician.
NOTE:
Erasing codes does not mean that trouble codes in ECU
have been eliminated completely. As long as there is fault
with the vehicle, the trouble codes will continue being set.
• This function is performed with key on engine
off (KOEO). Do not start the engine.
1. Use the Up/Down scroll buttons to select
Erase Codes from Diagnostics Menu (See
Figure 5.4) and press the OK button.
2. A warning message comes up asking for your confirmation.
Erase Codes
Erase trouble codes!
Are you sure?
YES NO
Figure 5.8
[e-mail]
38
1-800-348-5004