Full Product Manual
If there is not a DTC, the display indicates “No (pending)
codes are stored in the module!” Wait a few seconds
or press any key to return to previous screen.
NOTE:
The Permanent Codes function is available only
for vehicles supporting the CAN protocols.
3. View the DTCs and their definitions on the screen.
1/1
P1633 $10 BUICK
Ignition 0 Switch Circuit
?
Figure 5.6
4. If more than one DTC is found, use the Left/
Right scroll button to check all the codes.
• If retrieved DTCs contain any manufacturer specific or
enhanced codes, a “Manufacturer specific codes are
found! Press any key to select vehicle make!” message
comes up prompting you to select vehicle manufacturer to
view DTC definitions. Use Up/Down scroll button to select
manufacturer and then press OK button to confirm.
Vehicle Manufacturer 1/28
KCIUB
BMW
CADILLAC ?
CHEVROLET
CHRYSLER
FORD
Figure 5.7
customerservice@focus-ontools.com
37
1-800-348-5004