Full Product Manual

• If the “LINKING ERROR!” message does not go away,
have the tool inspected by a qualified technician.
7. You will be prompted to erase previously stored data.
• Review previously stored data
thoroughly before erasing.
Diagnostic
Erase previously
stored data to save
data from this test?
YES NO
Figure 5.1
• If no data is stored in the Scan Tool,
above prompt will not show up.
8. If you wish to erase the data, press the OK button; if you do
not want to erase the data, press ESC to exit or use Left/
Right button to select NO and press OK to continue.
9. View a summary of the System Status. Wait
a few seconds or press any key for Diagnostic
Menu (See Figure 5.4) to come up.
System Status
Codes Found 6
Ignition Type Spark
Monito
r
s N/A 3
Monito
r
s OK 3
Monito
r
s INC 5
Figure 5.2
[e-mail]
34
1-800-348-5004